General Purpose Distance Rig
Rig Components -
Main Body
1 x Oval Split Ring
4 x 5mm Beads
2 x Snood Swivel
2 x Crimps
2 x Breakaway Adjustable Crimps; telephone wire or Powergum stops can be substituted
1 x Lead Link with Breakaway Imp
Approx 1 to 1.2 metre length 60-80lb BS main line
Snood
1 x 800 to 1000 mm length 20 - 30lb BS snood
1 x 300 to 450 mm length 20 - 30lb BS snood
2 x 1 to 2/0 hook
2 x Sequins
Length of Powergum
The Rig Body
1. Tie on the lead link with the Imp (any other bait clip capable of holding two hooks may be used) and thread on the following components in this order;
Breakaway Adjustable Crimp / Bead / Swivel / Bead / Crimp
2. Repeat for the second snood swivel assembly.
3. Tie on the oval split ring. A swivel can be substituted.
4. Tie the hook to one end of the longest snood length and thread on the sequin bait stop.
5. Tie this snood to the upper swivel and add the Powergum stop knot. A length of silicon tubing can be pushed over the swivel eye to help prevent tangles.
6. Repeat steps 4 & 5 for the shorter, lower snood.
7. Tension the trace and loctate the shorter snood into the bait clip. Using the lower adjustable crimp tension the snood up the trace body and crimp in place. Locate the lower fixed crimp and fix in place.
8. Repeat step 7 for the upper snood.
