Boat RigsRigs and tracesShore Rigs

How to Tie a Bristle Boom Rig

Short to medium distance rig

The bristle boom rig is a short to medium distance shore rig also useful for scratching from the boat either uptiding or casting about with rolling lead.

Bristle Boom Rig Components

Main Body

1 x Medium Swivel

3 x Bristle Booms

1 x Lead Link

Approx. 1 metre length 60-80lb BS main line

Snoods

3 x 450mm approx. lengths 10-20lb BS snood

3 x 6 to 1/0 hooks

Bristle Booms

Prepare the booms by dabbing the end on a hot surface such as a soldering iron. This will form a blob which will be used to secure the boom to the trace line and hold the snood.

You can find suitable nylon bristles from street sweeping brushes or alternatively they can be ordered over the net from UK Hooks or from Holland and Belgium.

The Rig Body

1. Tie on the swivel or oval split ring to the top of the trace body and lead link to the bottom.

2. Tie a four or five turn blood loop towards the top of the trace body but instead of threading the loop through the knot body insert one of the bristle booms as shown. Moisten the knot and pull it tight round the boom.

matchstick booms knots

3. Repeat for the bottom and mid-trace booms.

4. Tie the snoods to the free end of the boom using a Uni knot or whip knot as shown; the snood lengths should be around 300mm with a 1 metre trace body. If you need to fish with longer snoods then it will be necessary to either lengthen the trace body, which may restrict casting. or reduce the number of snoods to two.

matchstick booms snoods knots

5. Beads and / or sequins can be added to the snoods as attractors before adding the hooks; buoyant beads can be effective on the upper snoods.

6. The breaking strain of the snoods and size of the hooks will depend upon the target species.


matchstick or bristle boom rig

There are numerous sources of terminal tackle both locally and on-line, here are a few suggestions –

Facebook Comments
a drop down plaice rig
Previous post

How to Tie Ada’s Plaice Rig

cascade rig
Next post

How to Tie a Cascade Rig

David Proudfoot

David Proudfoot