FloatsReviews

Redi Rig Release Float Reviewed

Concerns over the possible loss of balloons and plastic bottles and their effect on marine life and the wider environment led me to search out reusable float fishing alternatives. Research provided several ideas but eventually I settled on the Redi Rig release float range.

The Redi Rig release float range is manufactured with a simple polystyrene body and are produced in three basic shapes, a ball, a pear and a rounded end cylinder.

Redi Rig release float Predator

Redi Rig release float Predator version

Redi Rig release float Magnum

Redi Rig release float Magnum version

I have the Magnum version which can support up to 1.4kg and the 100mm version of the Predator Series which can suspend baits up to 90g.

While the bodies themselves are readily available as normal floats it is the unique central lock column which makes these floats unique.

Redi Rig release float stainless spring

A stainless spring maintains tension

The top of the float comprises a stainless crosslock snap clip which is held on a central bar and tensioned using a stainless spring.

Redi Rig release float stainless clip

A stainless clip secures the line

The release part of the float is located at the base and comprises two, thick, rubber washers. The top washer is fixed to the float base while the lower one is fixed to the central rod.

Redi Rig release float rubber washers

Two rubber washers apply friction

The lower washer moves downwards by applying pressure to the top of the rod above the snap clip.

Redi Rig release float washers open

The rubber washers in the open position

The float is simple to use; once the baited rig has been dropped to the required depth the main reel is slipped inside the opened snap clip. The clip is then closed to secure the line while still leaving the float free to run on the main line.

Redi Rig release float line in clip

The main line locked in the crosslock clip

The float is then locked in place by looping the line inside the opened rubber washers. Pressure on the top of the float at the central column separates the two washers.

The friction of the washers on the line can be varied according to its position within the washers. The closer the line is clamped to the edges of the washers the less pressure required to release the line. If using a braid main line the line should be trapped at the centre to ensure a good grip.

Redi Rig release float line in washers

Washers closed holding line under pressure

In the event that the line does not release on the strike the float can be released at the side of the boat.

I have used the Redi Rig release float mostly for boat fishing but they can be used from the shore as long as the cast is smooth. Any jerk during the cast is liable to cause premature release.

Redi Rig release float assembled on line

The float assembled on line

Unlike a fixed float or a sliding float limited by a stop knot the Redi Rig release float does not apply pressure to the fish and allows a free running fight.

They are a great option for the boat angler as the rig can be dropped to the sea bed, and wound up to the required depth before securing the float in place. It is extremely easy to relocate the float on the main line if the depth of the feeding fish changes.

The floats are not cheap but given that they are reusable they do represent good value for money.

They are available in the UK from Leadertec and are priced at £13.47 for the Magnum and £5.35 for the biggest Predator version.

redi rig float tope rig

Facebook Comments
Mark Thompson of the Lancashire Sea Fishing group with an 8lb ray
Previous post

Sport Warms Up On Lancashire Coast

Winners of the latest Colchester Sea Angling Club's Match
Next post

Colchester Club Hit The Thornback Rays

mm

David Proudfoot